Formatted capacity : 60GB
• High Speed Digital Signal Processor Based Architecture
• Low Power HDC
• Advanced Power Management Control
• Fluid Dynamic Bearing Spindle Motor Technology
• SATA S.M.A.R.T Compliant
• SATA 28-bit Address Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
• Free Fall Sensor (optional)

Drive Configurations

Capacity *	60 GB
Interface	PATA/ZIF
Buffer DRAM Size	8 MB
Byte per Sector	512
Rotational Speed	4200 RPM

Performance Specifications

Average Seek time (typical)	15.0 ms
Average Latency	8.3 ms
Media Transfer Rate (Max.)	458 Mb/s
Interface Transfer Rate (Max.)	100 MB/s
Drive Ready Time (typical)	2.0 sec

Reliability Specifications

Non-recoverable Read Error	1 sector in 10^13 bits
Controlled Ramp Load/Unload	600,000

Acoustics

Idle	6 Bel
Performance Seek	2.2 Bel

Environmental Specifications

Temperature / Operating	5 ~ 60 ℃
Temperature / Non-operating	-40 ~ 85 ℃
Humidity (non-condensing) / Operating	8 ~ 90 ％
Humidity (non-condensing) / Non-operating	8 ~ 90 ％
Liner Shock (1/2 sine pulse) / Operating	600 G
Liner Shock (1/2 sine pulse) / Non-operating	1500 G
Vibration / Operating	0.67 Grms
Altitude (relative to sea level) / Operating	-300 to 3.000 m
Altitude (relative to sea level) / Non-operating	-400 to 15,000 m

Power Requirements

Voltage	+3.3V ±5%
Spin-up Current (Max.)	400 mA
Seek (typical)	0.8 W
Read/Write (typical)	0.9 W
Idle	0.30 W
Standby (typical)	0.07 W
Sleep (typical)	0.07 W

Physical Dimension

Height (Max.)	5.0 mm
Width	71.0 mm
Length	54.0 mm
Weight (avg.)	48 g

Quantity : 9